Sigma 10-20 modified zoom clamp
These images are the result of lots of time and effort.
Please respect the copyright, if you want them - just ASK.
All images (C) Richard A Bailey, Images Underwater.
|
|
To do this I first put a wrap (or maybe two) of
insulating tape around the Zoom on the lens.
To this I then glued 4 short sections of a cut up
cable tie (2 on either side). This to match the
pattern of the Ikelite clamp.
I then wrapped another two layers of insulating
tape over the top to help keep in place.
|
|
Here you can see with the zoom gear / sleeve
mounted over the top.
You may have to mount the gear sleeve from the
body end before fitting to the camera but that is
not complex.
|
|
|
|
|
Here it is in the housing, perfect fit.
|
|
